Show Summary Details

Page of

PRINTED FROM the OXFORD RESEARCH ENCYCLOPEDIA, BUSINESS AND MANAGEMENT (business.oxfordre.com). (c) Oxford University Press USA, 2016. All Rights Reserved. Personal use only; commercial use is strictly prohibited. Please see applicable Privacy Policy and Legal Notice (for details see Privacy Policy).

date: 23 June 2017

Strategic Flexibility and Competitive Advantage

Summary and Keywords

Concerns regarding strategic flexibility arose from companies’ need to survive excess capacity and flagging sales in the face of previously unforeseen competitive conditions. Strategic flexibility became an organizational mandate for coping with changing competitive conditions and managers learned to plan for inevitable restructurings. They learned to reposition assets and capabilities to suit their firms’ new strategic aspirations by overcoming barriers to change. Core rigidities flared up in the form of legacy costs, regulatory constraints, political animosity, and social resistance to adjusting firms’ strategic postures; managers learned that their firms’ past strategic choices could later become barriers to adapting corporate strategy.

Managerial insights concerning how to modify firms’ resources changed the way in which they were subsequently regarded. Enterprises saw assets lose their relative productivity and value as mastery of specific knowledge become less germane to success. Managers recognized that their firms’ capabilities were mismatched to market or value-chain relationships. They struggled to adapt by overcoming barriers to change.

Flexibility problems were inevitable. Even if competitive conditions were not impacted by exogenous change forces, sustaining advantage in a steady-state competitive arena became difficult; sustaining advantage in dynamic arenas became nearly impossible. Confronted with the difficulties of changing strategic postures, market orientations, and overall cost competitiveness, managers embraced the need to combat organizational rigidity in all aspects of their firms’ operations. Strategic flexibility affected enterprise assets, capabilities, and potential relationships with other parties within firms’ value-creating ecosystems; the need for strategic flexibility influenced investment choices made to escape organizational rigidity, capability traps and other forms of previously unrecognized resource inflexibility.

Where entry barriers once protected a firm’s strategic posture, flexibility issues arose when the need for endogenous changes occurred. The temporary protection afforded by imitation barriers slowed an organization’s responsiveness to changing its strategy imperatives—making the firm rigid when adaptiveness was needed instead. A firm’s own inertia to change sometimes created mobility barriers that had to be overcome when hypercompetitive conditions arose in their traditional market arenas and forced firms to change how they competed.

Where exogenous changes drove competitive conditions to become more volatile, attainment of strategic flexibility mandated the need to downsize the scope of a firm’s activities, shut down facilities, prune product lines, reduce headcount, and eliminate redundancies—as typically occurred during an organizational turnaround—while simultaneously increasing the scope of external activities performed by an enterprise’s value-adding network of suppliers, distributors, value-added resellers, complementors, and alliance partners, among others. Such structural value-chain changes typically exacerbated pressures on the firm’s internal organization to search more broadly for value-adding innovations to renew products and processes to keep up with the accelerated pace of industry change. Exploratory processes of self-renewal forced confrontations with mobility or exit barriers that were long tolerated by firms in order to avoid coping with the painful process of their ultimate elimination. The sometimes surprising efforts by firms to avoid inflexibility included changes in the nature of firms’ asset investments, value-chain relationships, and human-resource practices. Strategic flexibility concerns often trumped the traditional strengths accorded to resource-based strategies.

Keywords: flexibility, advantage, strategy, mobility, value chain, investments, competition, barriers, outsource

Introduction

Firms’ need for strategic flexibility arose from concerns about future uncertainty (Eppink, 1978), with a particular concern for the effects of irreversible types of changes on firms’ strategic postures (Rhenman, 1973). Highly specialized assets had few alternative uses, which could become a matter for concern if those assets were no longer needed in the future. Strategic flexibility became of greater concern as the nature of competition dramatically evolved away from the activities and assets that had once been firms’ bastions of relative strength in serving customers.

Strategic flexibility had been critical to achieve since professionals in the Office of Strategic Services planned logistical programs of troop support during World War II and subsequently wrote about their insights. In particular, Igor Ansoff’s (1965) writings (based on his Rand Corporation and Lockheed Aircraft assignments) sensitized managers to the need for contingency planning in their strategic thinking.

Challenges from accelerating rates of technological change (and from entry by lower-wage offshore competitors) heightened managers’ concerns that their firms must plan proactively for strategic renewal in order to cope with continuous competitive change (Aaker & Mascarenhas, 1984; Chakravarthy, 1984; Hayes & Abernathy, 1980). In some cases, strategic flexibility concerns trumped the value accorded to resource-based strategies. The sometimes surprising results of avoiding inflexibility included changes in the nature of firms’ asset investments, value-chain relationships, and human-resource practices.

In this article about strategic flexibility, managers’ concerns about being trapped by ineffective strategic postures are traced from the economic theory of entry barriers, mobility barriers, and exit barriers. Physical assets and knowledge are highlighted as the corporate resources that were most at risk of becoming inflexible as the duration of all sources of competitive advantage became shorter over time. First, managerial practices are reviewed for substituting inflexible resources, as needed, to serve new types of customers. Typically, managers improved their firms’ strategic planning processes to remain flexible as competition intensified. Second, the impact of hypercompetitive environments on the effectiveness of all types of resource-based strategies is outlined. The quest to keep resources competitive is often translated into configurations that emphasize both flexible operations and the outsourcing of less-critical activities to supply-chain partners. Efforts to become asset-light are explained in terms of virtuality, partnering arrangements, and other relationship-based strategies.

Organizational rigidity explains why the market for corporate control has often swept inflexible firms into workout processes where they may be starved of capital and cannot invest in the physical assets needed to regain their competitiveness. The dark side of organizational rigidity is explored in terms of bankruptcies, liquidations, and other restructuring arrangements. Organizational ambidexterity sometimes emerges as a means of survival after firms have faced threats of such outcomes. Finally, the conclusion is reached that firms’ continued ability to maintain strategic flexibility over time in the face of many exogenous changes may itself be a source of competitive advantage to cultivate.

Barriers and Strategic Flexibility

Strategic flexibility concerns about adapting to changing competitive success requirements were exacerbated by the propensity for entry barriers—which had protected firms’ competitive positions initially (Bain, 1956)—to subsequently become mobility barriers when competitive conditions changed adversely (Caves & Porter, 1977). Enterprises that had not anticipated such changes faced difficulty repositioning themselves within a market, changing their game plans, or dismantling their current strategic postures, whereas younger competitors moved on to cope with exogenous changes in their markets by changing the rules of their mutually competitive game (D’Aveni, 1994).

Industry-wide average profit margins had indicated an industry’s relative attractiveness (Porter, 1980), and possession of valuable resources had contributed to a particular firm’s ability to outperform the industry’s average return on sales (Collis, 1991; Wernerfelt, 1984). High entry barriers were typically associated with unique and valuable resources. When these were possessed, firms’ choices in their strategic postures seemed to promise competitive advantage in the short-term. However, with time, the tangible and intangible resources that had once made a firm’s strategic posture difficult to imitate (by acting as entry barriers) could become neutralized by exogenous forces. For example, well-established firms that had for decades won patents to protect their technologies eventually faced disruptive competition from start-up firms which did not have to fund the pensions of the retired scientists and engineers who had created the patented inventions. This lack of liability provided competitive advantage for the newer competitors.

In some examples of strategic inflexibility, new types of competitors having lower-wage cost structures (or different macroeconomic objectives for engaging in commerce) captured many of the traditional customers of well-established firms by emphasizing product attributes the extant firms could not readily match. In other cases, economic recession, regulatory constraints, or demographic changes eroded demand for products and services so dramatically that assets had to be bottlenecked (throughput volumes were limited artificially ) or other adjustments made to reduce excessive operating costs created by excess capacity (DeWitt, 1998). Technological changes made some products—as well as the assets used to provide them—obsolete (Harrigan, 1980b), while the switching-cost barriers that had once commanded customer loyalties became eroded by exposure to new ways of satisfying demand introduced by the new competitors.

In light of these environmental changes, many firms tried unsuccessfully to change how they operated (Chang, 1998; Reed & DeFillippi, 1990), but they discovered that regulatory, political, and social resistance to adjusting their strategic postures made change difficult to implement (Lorange & Murray, 1984). Strategic inflexibility inhibited firms’ abilities to make changes to strategy because the very entry barriers that had once protected a firm’s ability to extract rents from its strategic outlays later hamstrung that same firm’s ability to make necessary changes to its resources, capabilities, and personnel practices. Consequently, managers took actions to understand the dynamics of barriers to change in order to modify their firms’ asset investments proactively. Barrier asymmetry had once been the basis for value in firms’ resources. Firms would later repudiate this attribute, which had once conveyed advantage, in order to remain flexible.

Mobility Barriers

Entry barriers (i.e., resources that prevented the easy imitation of firms’ unique strategic postures) sometimes also prevented protected firms from repositioning their market orientations to serve new types of customers effectively (or to serve extant customers differently). For example, the brand equity and ubiquitous store locations of retailer Sears, Roebuck lost value as younger shoppers patronized online specialty retailers offering overnight delivery of merchandise. The burden of supporting Blockbuster’s bricks-and-mortar distribution assets dragged it into bankruptcy when online delivery of entertainment became the norm.

Mobility barriers arose if the resources offering entry-barrier protection were subsequently difficult to redeploy (Caves & Ghemawat, 1992; Caves & Porter, 1977). Established firms wishing to diversify into similar but younger lines of business noticed that the success requirements needed to enter new markets were sometimes different from the strengths their extant resources conveyed (Smith & Cooper, 1988). Inflexibility was particularly likely to be encountered when introducing substitute products that employed different complements, channels of distribution, or service levels.

Even well-established firms that focused on providing underserved customers with the exact products (and services) sought by those specialty buyers were at risk. Focused firms commanded longer-lived loyalty from their particular market niches as long as these were of viable size, but focused firms faced fewer alternatives for using their dedicated resources elsewhere when demand shrank. The specialization they had invested in to serve their target customers affected them negatively when it was time to reposition strategically (Willard & Cooper, 1985).

Specialization was a two-edged sword; specialization may have connoted commitment to serving customers, but it also created embeddedness problems that managers struggled to overcome when they faced resistance to change (Ghemawat & del Sol, 1998; Granovetter, 1985). In response, flexible manufacturing programs were launched to combat the risks that resource redeployment would face exit barriers when greater competitive responsiveness was required (Gerwin, 1987; Slack, 1983). In addition to flexibility in physical assets, firms pondered how best to maintain flexibility in their use of human resources (Brockner, Grover, Reed, DeWitt, & O’Malley, 1987; Lorsch, 1986) and remain adaptive vis-à-vis how their brands and trademarks would be perceived as competitive conditions evolved (Grenwal & Tansuhaj, 2001). In particular, managers strived to overcome exit barriers as they moved their firms’ focus away from markets in which demand was stagnating or declining to those in which demand was growing (Caves & Porter, 1978; Harrigan, 1980a, 1981; Harrigan & Porter, 1983; Porter, 1976).

Exit Barriers

Porter (1976) identified exit barriers as being economic, strategic, and/or emotional factors that kept companies operating in troubled lines of business even though they were earning low or negative returns from doing so. The presence of high exit barriers created an adverse industry environment in which excess capacity (and failing competitors) could not be easily removed to bring supply in line with demand; price warfare typically followed when each trapped firm tried to fill their respective plants to break-even levels because they could not exit or easily redeploy their resources elsewhere (Harrigan, 1980a, 1982). Exit barriers acted as an extreme form of the mobility barriers that prevented firms from adjusting their mix of products, customers, technologies, and geographies to modify their respective strategic postures in response to changing success requirements.

Economic exit barriers were associated with those irreversible assets (e.g., specialized equipment for making paper) that could not be easily converted to other uses or sold to competitors, except at scrap-metal salvage values (Hozl, 2005; Rosenbaum & Lamort, 1992; Shaanan, 1994). Barriers arose from the way managers may have regarded any sunk costs that would incur accounting losses when such assets were retired. Exit barriers included (a) “legacy costs” associated with retired employees (e.g., pension and healthcare obligations owed to retirees but underfunded—as was the case in the U.S. steel, petrochemical, and automotive industries); (b) “remedial costs” (e.g., mandated clean-up costs associated with closing a facility); or (c) other “redundancy costs” that would be incurred in downsizing operations, among others. Such exit-associated expenses constituted barriers as firms unable to fund such costs postponed their incurrence by taking no action. The U.S. Pension Benefit Guaranty Corporation was created to ensure legacy costs were funded during the corporate restructurings that were frequently performed under court protection by failing firms as bankruptcy became a means of exiting from uncompetitive strategic postures.

Strategic exit barriers were sometimes obligations to supply past customers who were shared with a firm’s other divisions or mandated to be served by regulatory requirements (Harrigan, 1981). Linkages between two or more such businesses could incur reputational harm to ongoing businesses if discontinuation of products or services within the downsized business inconvenienced customers who were also purchasing products from sister business units. Vertical linkages between a firm’s business units became strategic exit barriers if one stage of the value-adding chain of activities became uneconomical but that unit’s operations could not be shut down because other business units in the corporate family depended on its viability (Harrigan, 1985a). For example, automotive firms discovered that they needed to help former parts suppliers whom they had abandoned after a model change if they expected to use those suppliers for components in future model years. Similarly, suppliers to the military forces had to be awarded minimum contract amounts even when they lost a particular bake-off competition for an aircraft, tank, or other type of weapons system in order to keep them viable during the years between systems upgrades or redesigns.

Emotional exit barriers originated with management’s rationalizations for deferring hard decisions that may have caused embarrassment. Examples included failures to discontinue the firm’s founding line of business products (or a manager’s particular arena of success) or to abandon routes associated with an airline’s history (Feldman, 2014; Schnell, 2001). Guilt about making workforce reductions, or other organizational changes, was sometimes so deeply entrenched—and managers were so reluctant to reduce headcount—that the exit barriers had to be refuted by clear and persistent evidence of recurring losses in order to be overcome (Schwenk & Tang, 1989). As many Japanese electronics firms discovered, the influence of mobility and exit barriers impeded managers from making timely operational and strategic changes when competitive conditions had diminished the value of their extant operations. Their facilities should have been closed (or moved to lower-wage sites) but were used to grow hydroponic vegetables instead. Worse, jealous managers associated with older technologies, for example, U.S. vacuum-tube producers, quashed in-house start-up efforts to make semiconductor devices, thereby preventing their firms from transitioning to next-generation, solid-state electronics (Harrigan, 1980b).

Procrastination in Transferring Assets and Knowledge within Organizations

Awareness that attributes of firms’ assets, knowledge workers, and organizational knowledge could potentially impede easy redeployment to new lines of business did not immediately drive firms to become asset-light and staffed primarily by outsourced service providers. Unique and irreplicable resources still conveyed advantage for serving customers in some contexts, and these resources remained valuable as long as no substitute resources could trump them (Barney, 1991; Peteraf, 1993). Knowledge workers continued to embody the distinctiveness that motivated customers to patronize particular vendors over others. The risks of ownership (or control) of these potentially inflexible strategic assets were sometimes mitigated by the installation of sunset-budgeting plans (whereby contingent costs of exit were researched and incorporated into cash-flow forecasts so that asset-deployment decisions could be made dispassionately). Managers searched more broadly for the diverse types of information that signaled the need for changes in their firm’s strategic posture (Tichy, 1993); the novel information they retrieved was used to build “trigger points” into their strategic planning processes that would force confrontation of decisions regarding what to do about potential inflexibility when certain causal events occurred. Strategic planning processes distinguished between linked gestalts of businesses and those in which resource transfers between business units were less likely to occur. Organizations adjusted the performance measures and incentives of their management systems to reflect whether a particular business unit’s actions had impact on, or did not have impact on, the flexibility of other corporate family members. The performance of related groups of businesses was often scrutinized together.

The recognition that the resources employed and bases for competitive advantage enjoyed by certain lines of business could not readily be transferred (or shared) with other lines of business affected firms’ diversification decisions (Collis & Montgomery, 2005). Ultimately, related lines of business—those that could share assets and know-how—employed operational (or behavioral) bases for assessing decision-making efficacy, whereas autarkic lines of business used financially based measures only. Sequestering lines of business in this manner helped firms to overcome potential problems with strategic exit barriers that were otherwise unrecognized until it was too late. Recognition of such strategic inflexibility mitigated firms’ potential to enjoy operating synergies across such related lines of business.

Recognition of intrafirm linkages among business units was helpful for transitioning to strategies that emphasized customer-based similarities instead of asset-based (or production-oriented) ways of conceptualizing strategy (Manral & Harrigan, 2015). Knowledge of customers’ expectations was a critical competitive resource that too many firms failed to renew. In particular, using a demand-based diversification logic was helpful in addressing the challenges of reaching customers via online conduits of contact. However, firms pursuing customer-based diversification strategies faced their own version of exit-barrier risks if vendors within their supply-and-delivery networks failed to adapt to customers’ changing expectations. Retailers often faced this form of mobility barrier when customers who had once carried them to success aged and changed their purchasing preferences, as in the example of Benetton’s changing market orientation. Briefly, Bennetton’s loyal customers wanted different types of apparel as they matured while Bennetton failed to attract the next wave of youthful buyers as successfully as they had attracted their predecessors. Inflexible merchandisers often failed to notice how the next wave of targeted consumers (those matching firms’ internal market-segmentation criteria) differed in their unique expectations of vendors. Salient differences between generations of customers meant that well-established merchandisers were no longer as well-suited to compete using their extant strategic postures. Brand equity, which had assumed great value after years of success in serving customers, became less meaningful to subsequent generations of consumers who patronized new brands.

Hypercompetition and the Death of Competitive Advantage

Barnett and Hansen (1996) noted that competition was like being on a treadmill (also likened to the Red Queen effect) in the sense that firms’ efforts continually to renew themselves created stronger competitors. Concerns about maintaining strategic flexibility led firms to engage in various types of innovative activities in order to keep up with their rivals’ newest competitive sorties (D’Aveni, 1994) or to carve out different, albeit temporary, bases for advantage. Too often, firms faced a competitive stalemate instead (McGrath, 2013). Temporary competitive advantage could be gained from perceived or actual product differentiation when serving customers, but the window of opportunity for exploiting any such advantages in serving customers sometimes closed abruptly, and new bases for attaining distinctiveness continually had to be found (Dreyer & Grønhaug, 2004; Meyer, Brookes, & Goes, 1990). Resource differences that had made some strategic postures more valuable than others were being negated, and resource asymmetry mattered less where hypercompetition raged.

As their industries trudged inexorably toward competitive stalemate, managers hunted for temporary respite from the pressures of creative destruction (Schumpeter, 1951) and the disruptive competitive changes (Christensen, 1997). Firms’ bases for sustaining profit margins evolved continually—from gaining advantages that resided in resources (Amit & Schoemaker, 1993; Bain, 1956; Barney, 1991; Connor, 1991; Mahoney & Pandian, 1992; Peteraf, 1993) to finding advantages in how managers organized and coordinated their operating activities and routines (Novak & Stern, 2008, 2009; Powell & Dent-Micallef, 1997) to advantages based on recruiting superior knowledge workers (Groysberg, Lee, & Nanda, 2008) to developing keener learning capabilities and absorptive capacity (Cohen & Levinthal, 1990; Lane & Lubatkin, 1998; Volberda, Foss, & Lyles, 2010) to making the firm’s organizational capabilities suitably dynamic so that its people can copy competitors’ sources of competitive advantage more nimbly (Helfat & Peteraf, 2003). Advantage had to evolve because the duration of any single basis for competitive advantage was often brief. Firms had to be flexible to keep abreast of (or anticipate) the next basis for competitive advantage (Tang, 1988; Volberda, 1996, 1997).

Because it seemed that in many industries no sources of competitive advantage were sustainable for long and that no resources conveyed advantage forever, firms struggled to remain nimble by investing along many competitive dimensions (Collis, 1994; D’Aveni, Dagnino, & Smith, 2010; McGrath, 2013; Ruefli & Wiggins, 2003). Because firms’ operating-profit margins were improved (relative to competitors) by enhancements in their cost structures or increases in customers’ willingness to pay higher prices (Ghemawat, 1986; Porter, 1985), they were continually forced to innovate, invest in new technologies, and collect smaller rents on extant resources as they moved on to their next basis for advantage (Hafeez, Zhang, & Malak, 2002). Simultaneously, firms were prospecting for new types of customers and creating new products that diverse niches of customers might value (Javalgi, Whipple, Ghosh, & Young, 2005; Johnson, Lee, Saini, & Grohmann, 2003; Sanchez, 1995, 1996). The search for advantage drove firms to make diversifying investments in new types of corporate resources, and it justified their organizational decisions to restructure extant asset postures (Slack, 2005; Verdú & Gómez-Gras, 2009).

Flexible Operations and Scope Reductions

Technological uncertainty drove firms to develop new capabilities to replace their skills before they become outmoded (Evans, 1991; Smith & Zeithaml, 1996; Yuan, Zhongfeng, & Yi, 2010; Zhou & Wu, 2010). Rigor in updating products, forcing obsolescence, and sunset-budgeting improved the flexibility of some firms’ operations (Dibrell, Down, & Bull, 2007; Weerd-Nederhof, Visscher, Altena, & Fisscher, 2008). Flexible operations were supported by greater cross-functional collaboration in product development as product life-cycle times accelerated (Lei, Hitt, & Goldhar, 1996; Rajala, Westerlund, & Moller, 2012; Young-Ybarra, & Wiersema, 1999). Prowess in management systems, information technology, and the flexible management of operations assumed greater importance in supporting management systems designed to stimulate adaption to change (Asif, Fisscher, de Bruijn, & Pagell, 2010; Beach, Muhlemann, Price, Paterson, & Sharp, 2000; Celuch, Murphy, & Callaway, 2007; Fredericks, 2005; Sanchez, 1997). Progress in attaining strategic goals was benchmarked by greater attention to reduced relative cycle time, accelerated clockspeed, and continuous process improvements as firms strived to retain their flexibility relative to competitors (Nadkarni & Narayanan, 2007; Stalk, 1988; Stalk & Hout, 1990; Tichy & Charan, 1989).

The race to balance flexibility with competitive advantage could not be static (Bettis & Hitt, 1995). Firms also devised processes for reusing (or disposing of) resources that had lost their relative strategic value. Manufacturing flexibility was supported by asset redeployment, retraining, and process innovation (Bahrami & Evans, 2011; Gerwin, 1993; Price, Beach, Muhlemann, Sharp, & Paterson, 1998; Upton, 1994). A focus on strengthening firms’ relative strengths (while spinning off auxiliary tasks where they were less competitive) was supported by astute scope reductions, downsizings, and exits from less-advantageous operating activities (DeWitt, 1993, 1998; Kazozcu, 2011; Kovenock & Phillips, 1997). Disintermediation of supplier-buyer relationships allowed firms to specialize in performing value-adding tasks that were strategic in nature while also forming networks of suppliers to perform ancillary value-chain tasks. Changes in the relationships within value-chain activities emphasized outsourcing, modularity, and logistical agility as firms exited from vertically related activities in which they lacked advantage and concentrated on a focused core of competitive strengths while they quasi-integrating the remaining processing stages through supply-chain partnership programs (Balakrishnan & Wernerfelt, 1986; Bergh, Johnson, & DeWitt, 2008; Decker & Mellewigt, 2007; Harrigan, 1985a, 1985b, 1986).

Outsourcing and Virtuality

The challenges created by accelerating technological change and entry by lower-cost, offshore competitors precipitated major structural changes in choosing which activities firms performed in-house versus the tasks they entrusted to their value-chain partners (Li & Tang, 2010, 2011; Mentzer, Min, & Zacharia, 2000). Where firms once strived to control all aspects of their value-adding postures in order to protect trade secrets and build advantage in performing critical tasks (Fronmueller & Reed, 1996), concerns about strategic inflexibility and relative competitive disadvantage led managers to entrust suppliers and distributors (or value-adding resellers) with tasks they considered to be of lesser importance to maintaining their organizations’ internal strengths, as occurred within the apparel, shoes, and other fashion-oriented businesses (Quinn, 1999; Quinn & Hilmer, 1994). In particular, the rise of the business process outsourcing (BPO) industry was driven by firms’ concerns about maintaining strategic flexibility by contracting out the tasks whose technologies changed faster than firms could manage internally (Nadkarni & Herrmann, 2010; Zhang, 2005, 2006). This capability shortfall facilitated the success of BPO firms, such as Wipro Technologies, Infosys, Tata Consultancy Services, and Cognizant, among others, as challengers to Accenture and IBM Business Consulting Services. As the need for greater flexibility in human-resource management practices became apparent, virtual organizational arrangements allowed firms to reduce headcount in some activities and still maintain access to needed services (Coucke, Pennings, & Sleuwaegen, 2007; Roca-Puig, Beltrán-Martin, Escrig-Tena, & Bou-Llusar, 2005; Wright & Snell, 1998). Flexible firms could position themselves at the center of spiders’ webs of supplier and distributor relationships to manage modular organizational arrangements where they were appropriate. But reductions in headcount also resulted in a leakage of organizational knowledge to competitors, as did many outsourcing activities. Organizational advantages were mitigated by such knowledge diffusion.

Successful outsourcing was supported by the development of superior logistical capabilities (Abrahamsson, Aldin, & Stahre, 2003; Swafford, Ghosh, & Murthy, 2008), modular designs, and close coordination with value-adding partners (Millington, Millington, & Cowburn, 1998; Sanchez & Mahoney, 1996; Worren, Moore, & Cardona, 2002). Formation of vertical strategic alliances enabled firms to outsource necessary activities to capable partners and at the same time retain access to needed supplies for the modules of value creation that they kept in-house. Collaboration with outsiders gave firms knowledge of germane technological advances and practices that might otherwise have been off their strategic radar (Bensaou & Anderson, 1999; Harrigan, 1986, 1988; Leiblein, Reuer, & Dalsace, 2002). Concerns about the loss of advantage through knowledge appropriation were frequently resolved by firms focusing their attention on bolstering their most valuable resources; these efforts included entering into virtual-firm arrangements with outsourcing partners and also participating in strategic alliances, crowdsourcing, and other flexible organizational forms for developing new resources and needed capabilities in the arenas in which they had sufficient knowledge to negotiate a view beyond their corporate scope of other firms’ innovations and practices (Bleecker, 1994; Gulati & Singh, 1998; Mitchell & Singh, 1996; Mohr & Spekman, 1994; Robertson & Gatignon, 1998). For products like laptop computers and cellphones, outsourcing partners (such as Lenovo, Samsung, and LG Electronics) grew to become formidable competitors in their own right (Apple seemed to be an exception; it managed to preserve its respective distinctiveness in computers and cellphones by presiding over supply-chain partners that did not become its competitors—until Foxconn acquired Sharp’s assets and brand marque). Success in attaining desirable levels of strategic flexibility depended on managers developing appropriate internal systems to prevent the development of organizational mobility barriers in those activities their firms owned (Goodstein, Boeker, & Stephan, 1996), while their firms also invested aggressively in those core capabilities controlled through in-house oversight of their alliance partners.

As managers implemented programs to avoid asset and workforce inflexibility, they assumed greater risks of relationship inflexibility, because their firms increasingly relied on third parties to implement their strategies. As competition became more diverse in the manner by which past investments in resources, capabilities, and competencies were made inadequate, firms were not allowed to cling to their past success recipes or to assume that reliance on alliance partners or supply-chain partners would stave off incursions by new types of competitors using radical approaches to serving customers. Strategic flexibility was best maintained by a thoughtful program of questioning the viability of extant competitive postures while searching for their successors.

Overcoming Organizational Rigidity

Because the temporary protection afforded by firms’ imitation barriers could dull an organization’s responsiveness to the need to change its strategy imperatives—making the firm rigid when it needed to be adaptive instead—managers were challenged to develop a means of preserving valuable internal strengths while simultaneously cannibalizing their embedded postures with improved organizational capabilities which may have been appropriated following exposure to third-party transactions. Because firms’ own organizational inertia may have created the internal mobility barriers they faced when trying to remain viable, the capabilities of laggard firms were ultimately starved of funding and became difficult to upgrade as hypercompetitive conditions developed in their traditional market arenas (Sharfman & Dean, 1997). Rigid corporate structures had to be dismantled or modified quickly, before such firms were swept away by the capital markets’ broom of efficiency through bankruptcy or liquidation; too frequently, rigid organizations were acquired by more flexible firms that profited by assuming responsibility for their valuable assets while unwinding their liabilities.

A variety of psychological and organizational forces conspired to prevent timely change from occurring within troubled firms (Combe, Rudd, Leeflang, & Greenley, 2012; de Figueiredo, Rawley, & Rider, 2015; Leonard-Barton, 1992; Schwenk & Tang, 1989). Their impact was apparent in the privatization processes occurring in Eastern European firms (Filatotchev, Buck, & Zhukov, 2000) and in the airline markets that had become liberalized (Schnell, 2006). Having reduced their commitment to inflexible asset configurations and outsourcing less-profitable activities to their value-chain partners, firms’ attentions turned to designing management systems for institutionalizing organizational flexibility, while their investment criteria focused on avoiding future capability traps (Carlsson, 1989; Englehardt & Simmons, 2002; Hitt, Keats, & DeMarie, 1998; Shimizu & Hitt, 2004; Weiss & Birnbaum, 1989).

Capability Traps

Timely responses to competitive incursions indicated the presence of flexible organizations that anticipated exogenous changes and shifted their strategic postures appropriately. Failures to respond affirmatively resulted in firms whose organizational capabilities were overvalued by their managers or could not be used effectively to retain customers (Collis, 1994; Smith, Grimm, Gannon, & Chen, 1991). Too often, the organizational capabilities of inflexible firms became trapped in a downward spiral as poor performance impaired their ability to renew themselves by investing in new technologies and processes as they became available—perhaps because they had not used partnering strategies advantageously when alliances were most appropriate in their respective industries (Combe & Greenley, 2004; Lyneis & Sterman, 2016; Matthyssens, Pauwels, & Vandenbempt, 2005; Singh, Oberoi, & Ahuja, 2013). Failure to upgrade organizational capabilities perpetuated mediocre performances that ultimately precipitated a crisis in which a firm’s organizational barriers had to be confronted (Repenning & Sterman, 2001, 2002). Few older organizations, for example, E. I. DuPont de Nemours or General Electric, could persist within their chosen industries without undergoing radical scope changes and internal upheavals to remedy organizational rigidity. Younger firms with narrower scopes often rose from the ashes of inflexible organizations that did not change quickly enough.

During this phase of an organization’s evolution—when trapped organizational capabilities endangered its viability—objective (third-party) leadership was often needed to identify a firm’s strengths and refocus its purpose while it was downsizing its scope and spinning off those resources that had lost their relative value. Sometimes such reorganizational confrontations were precipitated by infusions of advice from private-equity investors; in other cases, confrontation occurred during the process of turnaround—albeit supported by restructurings that forced write-offs of assets erroneously being hoarded for value lost long ago. When troubled firms’ managers intervened quickly enough to confront the barriers and traps that were miring the firms in old organizational policies and practices, success was sometimes found by emphasizing ambidextrous goals.

Ambidexterity and Flexible Management Systems

Ambidexterity enabled managers to be proactive in changing their firms’ strategic postures by exploring new sources of value creation while simultaneously exploiting the value of corporate resources that were still viable (Duncan, 1976; March, 1991). The ambidextrous organization simultaneously stimulated progress by exploring novel sources of improvement while preserving its valuable core of organizational strengths where those activities still worked effectively (Collins & Porras, 1994).

Ambidextrous management required a balanced approach to exploiting the firm’s then-valuable resources and capabilities while simultaneously searching for new potential strengths which would become valuable as the nature of competition evolved (Benner & Tushman, 2003; Tushman & O’Reilly, 1996; O’Reilly & Tushman, 2004). Company-wide organizational learning could be enhanced by employee rotations and programs to transfer knowledge among businesses. Diversified firms could utilize their extant cross-fertilizing processes to transfer best practices to new business units while allowing them the freedom to fulfill customers’ new expectations as they augmented by adapting accordingly.

Successful implementation of ambidexterity involved investigation of sometimes radical sources of innovation and willingness within the organization to evaluate new operating approaches and relationships with ancillary actors. Successful attainment of an appropriate balance between the familiar and the exotic in how firms approached changes in their strategic postures depended upon their organizations’ cultural values, as well as how their processes were organized to evaluate strategy alternatives (Bock, Opsahl, George, & Gann, 2012; Cabello-Medina, Carmona-Lavado, & Valle-Cabrera, 2006; Kouropalatis, Hughes, & Morgan, 2012; Wei, Yi, & Guo, 2013). Since organizations often resisted the need for change (Tamayo-Torres, Ruiz-Moreno, & Verdu, 2010), successful leaders had to keep the importance of maintaining strategic flexibility clearly in the forefront of their firms’ goals by reminding managers of how easily the next generation of would-be competitors sprang into existence to assuage any customer discontent that incumbent firms could not satisfy. The ready availability of entrepreneurial funding sources constituted a constant threat to the corporate complacency that managers fought to overcome.

Strategic Flexibility as Competitive Advantage

In summary, if no sources of competitive advantage were sustainable for long, and no resources maintained their relative value over time without adjustment, the continual quest for strategic flexibility could be construed as a valuable organizational advantage for firms engaged in this search activity. Maintaining strategic flexibility is difficult. Smaller and younger firms that lack the slack resources and managerial seasoning needed to audit their strategic postures will not readily question the persistence of practices symptomatic of inflexible strategies; instead they typically ride the wave of their temporary success to its inflection point without confronting the need to be introspective about strategic flexibility—until it may be too late. Well-established firms that entrust execution of critical tasks to outsiders so as to avoid resource inflexibility soon confront the daunting task of having to audit the strategic postures of their value-adding chain of affiliates, as well as their own flexibility, in order to maintain competitive viability. Astute new and well-established organizations both seek the middle ground between the extremes of a generalized strategic posture in which no resources can be too unique (hence inflexible) and the risk of being too specialized to serve customers’ needs well (even as customers’ expectations continue to evolve). The strategy literature eschews the use of focus strategies at the very time when buyers press for greater customization of purchased items in many industries, perhaps because so-called market niches are viable to serve for ever-decreasing periods of time.

Asset inflexibility is most at risk in industries facing technological changes where extant firms cannot easily cope with using value-chain arrangements that increase unintended bleedthrough of in-house knowledge to alliance partners and outsiders. Firms operating in regional markets (e.g., limestone excavators selling aggregates to local concrete firms) are better-protected against asset inflexibility from international competitors than are firms facing global markets where new rivals emerge from unexpected origins. In the latter case, customers’ wants and needs are converging and fragmenting worldwide and vendors who would satisfy their demand could be domiciled anywhere (often using newer-vintage assets with better cost structures to vend their wares). Industrial markets that require a process of stringent vendor certifications are better-protected against asset inflexibility created by new potential vendors than are markets serving residential consumers in which product specifications change faster and new brands reach buyers more easily. The value of extant intangible assets, such as brand marques, can be adjusted by continually matching firms’ market orientations to evolving customer expectations, but the waning value of intellectual property, such as patents and trade secrets, must be replenished through radical innovations or the acquisition of firms possessing appropriate technological assets that extant organizations may lack. Flexible organizations possessing sufficient strength in their managerial resources and systems can transition themselves to serve attractive customers most effectively. But the generalized nature of reliance on organizational assets that can be imitated more easily places flexible organizations in the precarious position of being ever-vigilant in their need to adjust their strategic posture in response to exogenous change. In essence, firms sacrifice uniqueness in resource content and configurations for the sake of greater flexibility to change.

Further Readings

Bahrami, H., & Evans, S. (2010). Super-flexibility for knowledge enterprises: A toolkit for dynamic adaptation. New York: Springer.Find this resource:

Fine, C. H. (1999). Clockspeed: Winning industry control in the age of temporary advantage. Reading, MA: Perseus Books.Find this resource:

Hamel, G., Prahalad, C. K., Thomas, H., & O’Neal, D. E. (Eds.). (1999). Strategic flexibility: Managing in a turbulent environment. New York: Wiley.Find this resource:

Harrigan, K. R. (1985). Strategic flexibility: A management guide for changing times. Lexington, MA: Lexington Books.Find this resource:

Harrigan, K. R. (2003). Declining demand, divestitures and corporate strategy. Frederick, MD: Beard Group. (Originally published in 1980 with the title Strategies for declining demand by Lexington Books, Lexington, MA.)Find this resource:

Sanchez, R., & Heene, A. (1997). Strategic learning and knowledge management. New York: Wiley.Find this resource:

Volberda, H. W. (2006). Strategic flexibility: Creating dynamic competitive advantages. In A. Campbell & D. O. Faulkner (Eds.), The Oxford handbook of strategy: A strategy overview and competitive strategy. Oxford: Oxford University Press.Find this resource:

References

Aaker, D. A., & Mascarenhas, B. (1984). The need for strategic flexibility. Journal of Business Strategy, 5(2), 74–82.Find this resource:

Abrahamsson, M., Aldin, N., & Stahre, F. (2003). Logistics platforms for improved strategic flexibility. International Journal of Logistics Research and Applications: A Leading Journal of Supply Chain Management, 6(3), 85–106.Find this resource:

Amit, R., & Schoemaker, P. J. H. (1993). Strategic assets and organizational rents. Strategic Management Journal, 14(1), 33–46.Find this resource:

Ansoff, I. (1965). Corporate strategy: An analytic approach to business policy for growth and expansion. New York: McGraw-Hill.Find this resource:

Asif, M., Fisscher, O. A. M., de Bruijn, E. J., & Pagell, M. (2010). Integration of management systems: A methodology for operational excellence and strategic flexibility. Operations Management Research, 3(3), 146–160.Find this resource:

Bahrami, H., & Evans, S. (2011). Super-flexibility for real-time adaptation: Perspectives from Silicon Valley. California Management Review, 53(3), 21–39.Find this resource:

Bain, J. S. (1956). Barriers to new competition. Cambridge, MA: Harvard University Press.Find this resource:

Balakrishnan, S., & Wernerfelt, B. (1986). Technical change, competition and vertical integration. Strategic Management Journal, 7(4), 347–359.Find this resource:

Barnett, W. P., & Hansen, M. T. (1996). The red queen in organizational evolution. Strategic Management Journal, 17(S1), 139–157.Find this resource:

Barney, J. (1991). Firm resources and sustained competitive advantage. Journal of Management, 17(1), 99–120.Find this resource:

Beach, R., Muhlemann, A. P., Price, D. H. R., Paterson, A., & Sharp, J. A. (2000). Manufacturing operations and strategic flexibility: Survey and cases. International Journal of Operations and Production Management, 20(1), 7–30.Find this resource:

Benner, M. J., & Tushman, M. L. (2003). Exploitation, exploration, and process management: The productivity dilemma revisited. Academy of Management Review, 28(2), 238–256.Find this resource:

Bensaou, M., & Anderson, M. (1999). Buyer-supplier relations in industrial markets: When do firms risk making idiosyncratic investments? Organization Science, 10, 460–481.Find this resource:

Bergh, D. D., Johnson, R. A., & DeWitt, R. (2008). Restructuring, through spin-off or sell-off: Transforming information asymmetries into financial gain. Strategic Management Journal, 29(2), 133–148.Find this resource:

Bettis, R. A., & Hitt, M. A. (1995). The new competitive landscape. Strategic Management Journal, 16(S1), 7–19.Find this resource:

Bleecker, S. E. (1994). The virtual organization. The Futurist, March–April, 9–14.Find this resource:

Bock, A. J., Opsahl, T., George, G., & Gann, D. M. (2012). The effects of culture and structure on strategic flexibility during business model innovation. Journal of Management Studies, 49(2), 279–305.Find this resource:

Brockner, J., Grover, S., Reed, T. F., DeWitt, R., & O’Malley, M. (1987). Survivors’ reactions to layoffs: We get by with a little help for our friends. Administrative Science Quarterly, 32(4), 526–541.Find this resource:

Cabello-Medina, C., Carmona-Lavado, A., & Valle-Cabrera, R. (2006). Identifying the variables associated with types of innovation, radical or incremental, strategic flexibility, organisation and context. International Journal of Technology Management, 35(1/4).Find this resource:

Carlsson, B. (1989). Flexibility and the theory of the firm. International Journal of Industrial Organization, 7(2), 179–203.Find this resource:

Caves, R. E., & Ghemawat, P. (1992). Identifying mobility barriers. Strategic Management Journal, 13(1), 1–12.Find this resource:

Caves, R. E., & Porter, M. E. (1977). From entry barriers to mobility barriers. Quarterly Journal of Economics, 91(2), 241–262.Find this resource:

Caves, R. E., & Porter, M. E. (1978). Barriers to exit. In R. T. Masson, & P. Qualls (Eds.), Essays on industrial organization in honor of Joe S. Bain. Cambridge, MA: Ballinger.Find this resource:

Celuch, K., Murphy, G. B., & Callaway, S. K. (2007). More bang for your buck: Small firms and the importance of aligned information technology capabilities and strategic flexibility. Journal of High Technology Management Research, 17(2), 187–197.Find this resource:

Chakravarthy, B. S. (1984). Strategic self-renewal: A planning framework for today. Academy of Management Review, 9(3), 536–547.Find this resource:

Chang, M. H. (1998). Product switching cost and strategic flexibility. Journal of Economics and Management Strategy, 7(3), 461–488.Find this resource:

Christensen, C. (1997). The innovator’s dilemma: When new technologies cause great firms to fail. Boston: Harvard Business Review Press.Find this resource:

Cohen, W. M., & Levinthal, D. A. (1990). Absorptive capacity: A new perspective on learning and invention. Administrative Science Quarterly, 35(1), 128–152.Find this resource:

Collins, J. C., & Porras, P. I. (1994). Built to last: Successful habits of visionary companies. New York: HarperCollins.Find this resource:

Collis, D. J. (1991). A resource-based analysis of global competition: The case of the bearings industry. Strategic Management Journal, 12(SI), 49–68.Find this resource:

Collis, D. J. (1994). How valuable are organizational capabilities? Strategic Management Journal, 15(SI), 143–152.Find this resource:

Collis, D. J., & Montgomery, C. A. (1993). Competing on resources: Strategy in the 1990s. Harvard Business Review, 73(4), 118–128.Find this resource:

Collis, D. J., & Montgomery, C. A. (2005). Corporate strategy: A resource-based approach. New York: Irwin Professional.Find this resource:

Combe, I. A., & Greenley, G. E. (2004). Capabilities for strategic flexibility: A cognitive content framework. European Journal of Marketing, 38, 1456–1480.Find this resource:

Combe, I. A., Rudd, J. M., Leeflang, P. S. H., & Greenley, G. E. (2012). Antecedents to strategic flexibility: Management cognition, firm resources and strategic options. European Journal of Marketing, 46, 1320–1339.Find this resource:

Connor, K. R. (1991). A historical comparison or resource-based theory and five schools of thought within industrial organization economics: Do we have a new theory of the firm? Journal of Management, 17(1), 121–154.Find this resource:

Coucke, K., Pennings, E., & Sleuwaegen, L. (2007). Employee layoff under different modes of restructuring: Exit, downsizing or relocation. Industrial and Corporate Change, 16(2), 161–182.Find this resource:

D’Aveni, R. A. (1994). Hypercompetition: Managing the dynamics of strategic maneuvering. New York: Free Press.Find this resource:

D’Aveni, R. A., Dagnino, G. B., & Smith, K. G. (2010). Guest editors’ introduction to the special issue: The age of temporary advantage. Strategic Management Journal, 31, 1371–1385.Find this resource:

Decker, C., & Mellewigt, T. (2007). Thirty years after Michael E. Porter: What do we know about business exit? Academy of Management Perspectives, 21(2), 41–55.Find this resource:

de Figueiredo, R., Rawley, E., & Rider, C. (2015). Why are firms rigid? A general framework and empirical tests. Organization Science, 26(5), 1502–1519.Find this resource:

DeWitt, R. (1993). The structural consequences of downsizing. Organization Science, 4(1), 30–40.Find this resource:

DeWitt, R. (1998). Firm, industry, and strategy influences on choice of downsizing approach. Strategic Management Journal, 19(1), 59–79.Find this resource:

Dibrell, C., Down, J., & Bull, L. (2007). Dynamic strategic planning: Achieving strategic flexibility through formalization. Journal of Business and Management, 13(1), 21–35.Find this resource:

Dreyer, B., & Grønhaug, K. (2004). Uncertainty, flexibility, and sustained competitive advantage. Journal of Business Research, 57(5), 484–494.Find this resource:

Duncan, R. (1976). Designing dual structures for innovation. In R. H. Kilman, L. R. Pondy, & D. Slevin (Eds.), The Management of Organizations (Vol. 1, pp. 167–188). Elsevier: Amsterdam.Find this resource:

Englehardt, C. S., & Simmons, P. R. (2002). Organizational flexibility for a changing world. Leadership and Organization Development Journal, 23(3), 113–121.Find this resource:

Eppink, D. J. (1978). Planning for strategic flexibility. Long Range Planning, 11(4), 9–15.Find this resource:

Evans, J. S. (1991). Strategic flexibility for high technology manoeuvres: A conceptual framework. Journal of Management Studies, 28(1), 69–89.Find this resource:

Feldman, E. R. (2014). Legacy divestitures: Motives and implications. Organization Science, 25, 815–832.Find this resource:

Filatotchev, I., Buck, T., & Zhukov, V. (2000). Downsizing in privatized firms in Russia, Ukraine and Belarus. Academy of Management Journal, 43(3), 286–304.Find this resource:

Fredericks, E. (2005). Infusing flexibility into business-to-business firms: A contingency theory and resource-based view perspective and practical implications. Industrial Marketing Management, 34(6), 555–565.Find this resource:

Fronmueller, M. P., & Reed, R. (1996). The competitive advantage potential of vertical integration. Omega: International Journal of Management Science, 24(6), 715–726.Find this resource:

Gerwin, D. (1987). An agenda for research on the flexibility of manufacturing processes. International Journal of Operations and Production Management, 7(1), 38–49.Find this resource:

Gerwin, D. (1993). Manufacturing flexibility: A strategic perspective. Management Science, 39(4), 395–410.Find this resource:

Ghemawat, P. (1986). Sustainable advantage. Harvard Business Review, 64, 53–58.Find this resource:

Ghemawat, P., & del Sol, P. (1998). Commitment versus flexibility? California Management Review, 40(4), 26–42.Find this resource:

Goodstein, J., Boeker, W., & Stephan, J. (1996). Professional interests and strategic flexibility: A political perspective on organizational contracting. Strategic Management Journal, 17, 577–586.Find this resource:

Granovetter, M. (1985). Economic action and social structure: A theory of embeddedness. American Journal of Sociology, 91, 481–510.Find this resource:

Groysberg, B., Lee, L. E., & Nanda, A. (2008). Can they take it with them? The portability of star knowledge workers’ performance. Management Science, 54, 1213–1230.Find this resource:

Grenwal, R., & Tansuhaj, P. (2001). Building organizational capabilities for managing economic crisis: The role of market orientation and strategic flexibility. Journal of Marketing, 65(2), 67–80.Find this resource:

Gulati, R., & Singh, H. (1998). The architecture of cooperation: Managing coordination costs and appropriation concerns in strategic alliances. Administrative Science Quarterly, 43, 781–814.Find this resource:

Hafeez, K., Zhang, Y. B., & Malak, N. (2002). Core competence for sustainable competitive advantage: A structured methodology for identifying core competence. IEEE Transactions on Engineering Management, 49(1).Find this resource:

Harrigan, K. R. (1980a). The effect of exit barriers on strategic flexibility. Strategic Management Journal, 1(2), 165–176.Find this resource:

Harrigan, K. R. (1980b). Strategies for declining businesses. Lexington, MA: Lexington Books. Reprinted in 2003 with the title Declining demand, divestitures and corporate strategy.Find this resource:

Harrigan, K. R. (1981). Deterrents to divestiture. Academy of Management Journal, 24, 306–323.Find this resource:

Harrigan, K. R. (1982). Exit decisions in mature industries. Academy of Management Journal, 25, 707–732.Find this resource:

Harrigan, K. R. (1985a). Exit barriers and vertical integration. Academy of Management Journal, 28, 686–697.Find this resource:

Harrigan, K. R. (1985b). Strategies for interfirm transfers and outside sourcing. Academy of Management Journal, 28, 914–925.Find this resource:

Harrigan, K. R. (1986). Matching vertical integration strategies to competitive conditions. Strategic Management Journal, 7, 535–555.Find this resource:

Harrigan, K. R. (1988). Joint ventures and competitive strategy. Strategic Management Journal, 9(2), 141–158.Find this resource:

Harrigan, K. R., & Porter, M. E. (1983). End-game strategies for declining industries. Harvard Business Review, 61(4), 111–120.Find this resource:

Hayes, R. H., & Abernathy, W. J. (1980). Managing our way to economic decline. Harvard Business Review, 58(4), 67–77.Find this resource:

Helfat, C. E., & Peteraf, M. A. (2003). The dynamic resource-based view: Capabilities life cycles. Strategic Management Journal, 24, 997–1010.Find this resource:

Hitt, M. A., Keats, B. W., & DeMarie, S. M. (1998). Navigating in the new competitive landscape: Building strategic flexibility and competitive advantage in the 21st century. Academy of Management Perspectives, 12(4), 22–42.Find this resource:

Hozl, W. (2005). Tangible and intangible sunk costs and the entry and exit of firms in a small open economy: The case of Austria. Applied Economics, 37, 2429–2443.Find this resource:

Javalgi, R. G., Whipple, T. W., Ghosh, A. K., & Young, R. B. (2005). Market orientation, strategic flexibility, and performance: Implications for services providers. Journal of Services Marketing, 19(4), 212–221.Find this resource:

Johnson, J. L., Lee, R. P. W., Saini, A., & Grohmann, B. (2003). Market-focused strategic flexibility: Conceptual advances and an integrative model. Journal of the Academy of Marketing Science, 31(1), 74–89.Find this resource:

Kazozcu, S. B. (2011). Role of strategic flexibility in the choice of turnaround strategies: A resource-based approach. Procedia: Social and Behavioral Sciences, 24, 444–459.Find this resource:

Kouropalatis, Y., Hughes, P., & Morgan, R. E. (2012). Pursuing “flexible commitment” as strategic ambidexterity: An empirical justification in high technology firms. European Journal of Marketing, 46(10), 1389–1417.Find this resource:

Kovenock, D., & Phillips, G. M. (1997). Capital structure and product market behavior: An investigation of plant exit and investment decisions. Review of Financial Studies, 10, 767–803.Find this resource:

Lane, P. J., & Lubatkin, M. (1998). Relative absorptive capacity and interorganizational learning. Strategic Management Journal, 19, 461–477.Find this resource:

Lei, D., Hitt, M. A., & Goldhar, J. D. (1996). Advanced manufacturing technology: Organizational design and strategic flexibility. Organization Studies, 17, 501–523.Find this resource:

Leiblein, M. J., Reuer, J. J., & Dalsace, F. (2002). Do make or buy decisions matter? The influence of organizational governance on technological performance. Strategic Management Journal, 23, 817–833.Find this resource:

Leonard-Barton, D. (1992). Core capabilities and core rigidities: A paradox in managing new product development, Strategic Management Journal, 13(S1), 111–125.Find this resource:

Li, H. L., & Tang, M. J. (2010). Vertical integration and innovative performance: The effects of external knowledge sourcing modes. Technovation, 30(7/8), 401–410.Find this resource:

Li, H. L., & Tang, M. J. (2011). Vertical integration, escalating commitment, and technological performance: Evidence from firms in the U.S. computer industry. Technology Analysis and Strategic Management, 23(3), 279–296.Find this resource:

Lorange, P., & Murray, E. (1984). Considerations in implementing strategic control. Journal of Business Strategy, 4(4), 27–35.Find this resource:

Lorsch, J. W. (1986). Managing culture: The invisible barrier to strategic change. California Management Review, 28(2), 95–109.Find this resource:

Lyneis, J., & Sterman, J. (2016) How to save a leaky ship: Capability traps and the failure of win-win investments in sustainability and social responsibility. Academy of Management Discoveries, 2(1), 7–32.Find this resource:

Mahoney, J. T., & Pandian, J. R. (1992). The resource-based view within the conversation of strategic management. Strategic Management Journal, 13(5), 363–380.Find this resource:

Manral, L., & Harrigan, K. R. (2015). The performance implications of demand-side diversification: Evidence from the U.S. telecommunications sector, 1990–1996. Journal of Strategic Marketing.Find this resource:

March, J. G. (1991). Exploration and exploitation in organizational learning. Organization Science, 2(1), 71–86.Find this resource:

Matthyssens, P., Pauwels, P., & Vandenbempt, K. (2005). Strategic flexibility, rigidity and barriers to the development of absorptive capacity in business markets: Themes and research perspectives. Industrial Marketing Management, 34, 547–554.Find this resource:

McGrath, R. G. (2013). The end of competitive advantage: How to keep your strategy moving as fast as your business. Boston: Harvard Business Review Press.Find this resource:

Mentzer, J. T., Min, S., & Zacharia, Z. G. (2000). The nature of interfirm partnering in supply chain management. Journal of Retailing, 76, 549–568.Find this resource:

Meyer, A. D., Brookes, G. R., & Goes, J. B. (1990). Environmental jolts and industry revolutions: Organizational responses to discontinuous change. Strategic Management Journal, 11, 93–110.Find this resource:

Millington, A. I., Millington, C. E. S., & Cowburn, M. (1998). Local assembly units in the motor components industry: A case of exhaust manufacture. International Journal of Operations and Production, 18(1/2), 180–195.Find this resource:

Mitchell, W., & Singh, K. (1996). Survival of businesses using collaborative relationships to commercialize complex goods. Strategic Management Journal, 17(3), 169–195.Find this resource:

Mohr, J., & Spekman, R. (1994). Characteristics of partnership success: Partnership attributes, communication behavior, and conflict resolution techniques. Strategic Management Journal, 15(2), 135–152.Find this resource:

Nadkarni, S., & Narayanan, V. K. (2007). Strategic schemas, strategic flexibility, and firm performance: The moderating role of industry clockspeed. Strategic Management Journal, 28(3), 243–270.Find this resource:

Nadkarni, S., & Herrmann, P. O. L. (2010). CEO personality, strategic flexibility, and firm performance: The case of the Indian business process outsourcing industry. Academy of Management Journal, 53, 1050–1073.Find this resource:

Novak S., & Stern, S. (2008). How does outsourcing affect performance dynamics? Evidence from the automobile industry. Management Science, 54, 1963–1979.Find this resource:

Novak, S., & Stern, S. (2009). Complementarity among vertical integration decisions: Evidence from automobile product development. Management Science, 55, 311–332.Find this resource:

O’Reilly, C. A., & Tushman, M. L. (2004). The ambidextrous organization. Harvard Business Review, 82(4), 74–81.Find this resource:

Peteraf, M. A. (1993). The cornerstones of competitive advantage: A resource-based view. Strategic Management Journal, 14(3), 179–191.Find this resource:

Porter, M. E. (1976). Please note location of nearest exit: Exit barriers and planning. California Management Review, 19(2), 21–33.Find this resource:

Porter, M. E. (1980). Competitive strategy: Techniques for analyzing industries and competitors. New York: Free Press.Find this resource:

Porter, M. E. (1985). Competitive advantage: Creating and sustaining superior performance. New York: Free Press.Find this resource:

Powell, T. C., & Dent-Micallef, A. (1997). Information technology as competitive advantage: The role of human, business, and technology resources. Strategic Management Journal, 18, 375–405.Find this resource:

Price, D. H. R., Beach, R., Muhlemann, A. P., Sharp, J. A., & Paterson, A. (1998). A system to support the enhancement of strategic flexibility in manufacturing enterprises. European Journal of Operational Research, 109(2), 362–376.Find this resource:

Quinn, J. B. (1999). Strategic outsourcing: Leveraging knowledge capabilities. Sloan Management Review, 40(4), 9–21.Find this resource:

Quinn, J. B., & Hilmer, F. G. (1994). Strategic outsourcing. Sloan Management Review, 35(4), 43–55.Find this resource:

Rajala, R., Westerlund, M., & Moller, K. (2012). Strategic flexibility in open innovation: Designing business models for open source software. European Journal of Marketing, 46(10), 1368–1388.Find this resource:

Reed, R., & DeFillippi, R. J. (1990). Causal ambiguity, barriers to imitation, and sustainable competitive advantage. Academy of Management Review, 15(1), 88–102.Find this resource:

Repenning, N. P., & Sterman, J. D. (2001). Nobody ever gets credit for fixing problems that never happened: Creating and sustaining process improvement. California Management Review, 43(4), 64–88.Find this resource:

Repenning, N. P., & Sterman, J. D. (2002). Capability traps and self-confirming attribution errors in the dynamics of process improvement. Administrative Science Quarterly, 47(2), 265–295.Find this resource:

Rhenman, E. (1973). Organizational theory for long-range planning. London: Wiley.Find this resource:

Robertson, T. S., & Gatignon, H. (1998). Technology development mode: A transaction cost conceptualization. Strategic Management Journal, 19(6), 515–531.Find this resource:

Roca-Puig, V., Beltrán-Martin, I., Escrig-Tena, A. B., & Bou-Llusar, J. C. (2005). Strategic flexibility as a moderator of the relationship between commitment to employees and performance in service firms. International Journal of Human Resource Management, 16, 2075–2093.Find this resource:

Rosenbaum, D. I., & Lamort, F. (1992). Entry, barriers, exit, and sunk costs: An analysis. Applied Economics, 24(3), 297–304.Find this resource:

Ruefli, T. W., & Wiggins, R. R. (2003). Industry, corporate, and segment effects and business performance: A non-parametric approach. Strategic Management Journal, 24, 861–879.Find this resource:

Sanchez, R. (1995). Strategic flexibility in product competition. Strategic Management Journal, 16(S1), 135–159.Find this resource:

Sanchez, R. (1996). Strategic product creation: Managing new interactions of technology, markets, and organizations. European Management Journal, 14(2), 121–138.Find this resource:

Sanchez, R. (1997). Preparing for an uncertain future: Managing organizations for strategic flexibility. International Studies of Management and Organization, 27(2), 71–94.Find this resource:

Sanchez, R., & Mahoney, J. T. (1996). Modularity, flexibility, and knowledge management in product and organization design. Strategic Management Journal, 17(S2), 63–76.Find this resource:

Schnell, M. C. A. (2001). Managerial perceptions of barriers to route exit: Evidence from Europe’s civil aviation markets. Journal of Air Transport Management, 7(2), 95–102.Find this resource:

Schnell, M. C. A. (2006). Existence and effectiveness perceptions of exit-barrier factors in liberalised airline markets. Transportation Research Part E: Logistics and Transportation Review, 42(3), 225–242.Find this resource:

Schumpeter, J. A. (1951). The creative response in economic history. Journal of Economic His-tory, 7(2), 149–159.Find this resource:

Schwenk, C., & Tang, M. J. (1989). Economic and psychological explanations for strategic persistence. Omega: International Journal of Management Science, 17, 559–570.Find this resource:

Shaanan, J. (1994). Sunk costs and resource mobility: An empirical-study. Review of Industrial Organization, 9, 717–730.Find this resource:

Sharfman, M. P., & Dean, J. W., Jr. (1997). Flexibility in strategic decision making: Informational and ideological perspectives. Journal of Management Studies, 34(2), 191–217.Find this resource:

Shimizu, K., & Hitt, M. A. (2004). Strategic flexibility: Organizational preparedness to reverse ineffective strategic decisions. Academy of Management Executive, 18(4), 44–59.Find this resource:

Singh, D., Oberoi, J. S., & Ahuja, I. S. (2013). An empirical investigation of dynamic capabilities in managing strategic flexibility in manufacturing organizations. Management Decision, 51, 1442–1461.Find this resource:

Slack, N. (1983). Flexibility as a manufacturing objective. International Journal of Operations and Production Management, 3(3), 4–13.Find this resource:

Slack, N. (2005). The changing nature of operations flexibility. International Journal of Operations & Production Management, 25, 1201–1210.Find this resource:

Smith, C. G., & Cooper, A. C. (1988). Established companies diversifying into young industries: A comparison of firms with different levels of performance. Strategic Management Journal, 9(2), 111–121.Find this resource:

Smith, A. D., & Zeithaml, C. (1996). Garbage cans and advancing hypercompetition: The creation and exploitation of new capabilities and strategic flexibility in two regional Bell operating companies. Organization Science, 7, 388–399.Find this resource:

Smith, K. G., Grimm, C. M., Gannon, M. J., & Chen, M. J. (1991). Organizational information-processing, competitive responses, and performance in the United States domestic airline industry. Academy of Management Journal, 34(1), 60–85.Find this resource:

Stalk, G. (1988). Time: The next source of competitive advantage. Harvard Business Review, 66(4), 41–53.Find this resource:

Stalk, G., & Hout, T. M. (1990). Competing against time. New York: Free Press.Find this resource:

Swafford, P. M., Ghosh, S., & Murthy, N. (2008). Achieving supply chain agility through IT integration and flexibility. International Journal of Production Economics, 116(2), 288–297.Find this resource:

Tamayo-Torres, I., Ruiz-Moreno, A., & Verdu, A. J. (2010). The moderating effect of innovative capacity on the relationship between real options and strategic flexibility. Industrial Marketing Management, 39, 1120–1127.Find this resource:

Tang, M. J. (1988). An economic-perspective on escalating commitment. Strategic Management Journal, 9(S1), 79–92.Find this resource:

Tichy, N., & Charan, R. (1989). Speed, simplicity, self-confidence. Harvard Business Review, 67(5), 112–120.Find this resource:

Tichy, N. M. (1993). Revolutionize your company. Fortune, December 13, 114–118.Find this resource:

Tushman, M. L., & O’Reilly, C. A. (1996). Ambidextrous organizations: Managing evolutionary and revolutionary change. California Management Review, 38(4), 8–30.Find this resource:

Upton, D. A. (1994). The management of manufacturing flexibility. California Management Review, 36(2), 72–89.Find this resource:

Verdú, A. J., & Gómez-Gras, J. M. (2009). Measuring the organizational responsiveness through managerial flexibility. Journal of Organizational Change Management, 22, 668–690.Find this resource:

Volberda, H. W. (1996). Toward the flexible form: How to remain vital in hypercompetitive environments. Organization Science, 7, 359–374.Find this resource:

Volberda, H. W. (1997). Building flexible organizations for fast-moving markets. Long Range Planning, 30(2), 169–183.Find this resource:

Volberda, H. W., Foss, N. J., & Lyles, M. A. (2010). Absorbing the concept of absorptive capacity: how to realize its potential in the organization field. Organization Science, 21, 931–951.Find this resource:

Weerd-Nederhof, P. C. de, Visscher, K., Altena, J., & Fisscher, O. A. M. (2008). Operational effectiveness and strategic flexibility: Scales for performance assessment of new product development systems. International Journal of Technology Management, 44(3/4).Find this resource:

Wei, Z., Yi, Y., & Guo, H. (2013). Organizational learning ambidexterity, strategic flexibility, and new product development. Journal of Product Innovation Management, 31(4), 832–847.Find this resource:

Weiss, A. R., & Birnbaum, P. H. (1989). Technological infrastructure and the implementation of technological strategies. Management Science, 35(8), 1014–1026.Find this resource:

Wernerfelt, B. (1984). A resource based view of the firm. Strategic Management Journal, 5(2), 171–180.Find this resource:

Willard, G. E., & Cooper, A. C. (1985). Survivors of industry shake-outs: The case of the United-States color-television set industry. Strategic Management Journal, 6(4), 299–318.Find this resource:

Worren, N., Moore, K., & Cardona, P. (2002). Modularity, strategic flexibility, and firm performance, a study of the home appliance industry. Strategic Management Journal, 23(12), 1123–1140.Find this resource:

Wright, P. M., & Snell, S. A. (1998). Toward a unifying framework for exploring fit and flexibility in strategic human resource management. Academy of Management Review, 23, 756–772.Find this resource:

Young-Ybarra, C., & Wiersema, M. (1999). Strategic flexibility in information technology alliances: The influence of transaction cost economics and social exchange theory. Organization Science, 10(4), 439–459.Find this resource:

Yuan, L., Zhongfeng, S., & Yi, L. (2010). Can strategic flexibility help firms profit from product innovation? Technovation, 30(5/6), 300–309.Find this resource:

Zhang, M. J. (2005). Information systems, strategic flexibility and firm performance: An empirical investigation. Journal of Engineering and Technology Management, 22(3), 163–184.Find this resource:

Zhang, M. J. (2006). IS support for strategic flexibility, environmental dynamism, and firm performance. Journal of Managerial Issues, 18(1), 84–103.Find this resource:

Zhou, K. Z., & Wu, F. (2010). Technological capability, strategic flexibility, and product innovation. Strategic Management Journal, 31(5), 547–561.Find this resource: